DemoSAM9 < Linux2

Linux2 Web>DemoImages>DemoSAM9 (2012-10-03, AndersGrahn) (raw view)

---++ Use a Wi-Fi demo image on Atmel SAM9 platforms

The following image files are available for the SAM9X5EK, SAM9M10-EKES, SAM9M10 G45-EK, SAM9G20-EK and SAM9RLEK platforms:

| *File* | *Version* | *Description* |
| [[%ATTACHURL%/at91sam9x5ek-wifi-1.0.6.zip][at91sam9x5ek-wifi-1.0.6.zip]] | 1.0.6 | Wi-Fi demo image for Trash.LinuxSAM9X5EK |
| [[%ATTACHURL%/hdwireless-angstrom-at91sam9g20ek-wifi-1.0.6.zip][at91sam9g20ek-wifi-1.0.6.zip]] | 1.0.6 | Wi-Fi demo image for SAM9G20-EK (EXPERIMENTAL) |
| [[%ATTACHURL%/hdwireless-angstrom-at91sam9m10ekes-wifi-1.0.5.zip][at91sam9m10ekes-wifi-1.0.5.zip]] | 1.0.5 | Wi-Fi demo image for SAM9M10-EKES |
| [[%ATTACHURL%/hdwireless-angstrom-at91sam9m10g45ek-wifi-1.0.5.zip][at91sam9m10g45ek-wifi-1.0.5.zip]] | 1.0.5 | Wi-Fi demo image for SAM9M10G45-EK |
| [[%ATTACHURL%/hdwireless-angstrom-at91sam9rlek-wifi-1.0.5.zip][at91sam9rlek-wifi-1.0.5.zip]] | 1.0.5 | Wi-Fi demo image for SAM9RLEK |
| [[%ATTACHURL%/hdwireless-angstrom-at91sam9m10ekes-wifi-1.0.4.zip][at91sam9m10ekes-wifi-1.0.4.zip]] | 1.0.4 | Wi-Fi demo image for SAM9M10-EKES |

The procedure is a little bit different depending on the windows version used. If a linux host is used, see http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Flashing_a_demo_on_AT91_boards for information about how to flash the demo image.

When the platform is started with a demo image, the Wi-Fi device can be used according to description in the [[UseDrivers]] topics.

*NOTE*: The wpa_supplicant is included in the demo image and is launched at boot time. If you wan't to evaluate the Wi-Fi device using wireless tools, make sure to shutdown the wpa_supplicant first.

*NOTE*: See board-specific notes at end of this page.
---+++ Windows (common steps for all windows versions)
   1 Install the SAM-BA tool. It can be downloaded from: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3883<br /><strong>For SAM9X5EK:</strong> After SAM-BA is installed, download and install the additional patch to sam-ba: http://www.atmel.com/dyn/resources/prod_documents/sam-ba-2.10-sam9g15_g25_g35_x25_x35_patch_1.0.zip
   1 Download the desired image file (compressed) from the table above.
   1 Uncompress the image file.
   1 *For SAM9M10-EKES and SAM9M10G45-EK:* Make sure that the jumpers on the board are configured according to the default settings, as shown in this picture: [[http://www.at91.com/linux4sam/pub/Linux4SAM/GettingStarted/9m10g45_default_jumpers_settings.png][http://www.at91.com/linux4sam/pub/Linux4SAM/GettingStarted/9m10g45_default_jumpers_settings.png]]. Then open jumper JP10 and JP12 on the board. <br /><strong>For SAM9RLEK:</strong> Set jumper J11 to position 1-2 and open jumper J12 and J13. <br /><strong>For SAM9G20EK:</strong> Open J7, J33, J34.<br /><strong>For SAM9X5EK</strong>: Open jumpers on the CPU-board.
   1 Attach the power cable to the board
   1 Attach the USB cable to the board and the PC.
   1 The PC should now find the board.
   1 <strong>For SAM9M10-EKES and SAM9M10G45-EK: </strong>Now close jumpers JP10 and JP12. <br /><strong>For SAM9RLEK: </strong>Close jumpers J12 and J13. <br /><strong>For SAM9G20EK:</strong> Close J33, J34.<br /><strong>For SAM9X5EK</strong>: Close jumpers on the CPU-board.
---+++ Windows 7
   1 Perform the common steps as described above.
   1 The board will show up as "GPS Camera Detect (COM6)" in the device manager.
   1 Open a command window
   1 Cd to the directory which contain the contents of the unzipped file.
   1 Execute the following command<br /> <verbatim>sam-ba_cdc.exe</verbatim>
   1 A small window with the title "SAM-BA CDC 2.10" should show up. In this window, select the board connection and the board type. Then press "connect".
   1 The main SAM-BA CDC window will now open. Select "Execute Script File" from the "Script File" menu and select the tcl-file which ends with "_nandflash.tcl".
   1 The flashing of the image will now start and might take 5-10 minutes.
---+++ Windows XP
   1 Perform the common steps as described above.
   1 Use windows explorer to find the contents of the unzipped file.
   1 Double-click on the bat-file which ends with "_nandflash.bat".
   1 A log-file will pop up when the flashing is completed.
---+++ SAM9G20-EK
   * This development board has two MMC connectors. The J35 connector is used, since the other connector does not support SDIO.
   * The Card Detection fails, therefore PC2 needs to be connected to GND using a wire.
   * If the second connector is used for an SD-Card, then PC9 needs to be Grounded.

Attachments

Topic attachments
I	Attachment	Action	Size	Date	Who	Comment
zip	at91sam9x5ek-wifi-1.0.6.zip	manage	12904.6 K	2011-09-19 - 11:35	AndersGrahn	Wi-Fi demo image for SAM9X5-EK
zip	hdwireless-angstrom-at91sam9g20ek-wifi-1.0.6.zip	manage	21619.8 K	2011-11-18 - 13:54	AndersGrahn	Wi-Fi demo image for SAM9G20-EK
zip	hdwireless-angstrom-at91sam9m10ekes-wifi-1.0.4.zip	manage	37139.1 K	2011-02-17 - 13:55	AndersGrahn	Wi-Fi demo image for SAM9M10-EKES and SAM9M10-G45-EK
zip	hdwireless-angstrom-at91sam9m10ekes-wifi-1.0.5.zip	manage	37139.7 K	2011-02-17 - 14:03	AndersGrahn
zip	hdwireless-angstrom-at91sam9m10g45ek-wifi-1.0.5.zip	manage	37142.7 K	2011-02-17 - 14:00	AndersGrahn
zip	hdwireless-angstrom-at91sam9rlek-wifi-1.0.5.zip	manage	30134.0 K	2011-02-17 - 13:58	AndersGrahn

Topic revision: r7 - 2012-10-03 - 10:17:38 - AndersGrahn

Linux2

Welcome

HDG200

Getting Started
Download and Build
Platforms
Demo Images
Documents
- icon:pdf.gif 1453-_HDG200_Hardware_Design_Guide_pa2.pdf

HDG200B

HDG204

SPB209A

HDG229

Getting Started
Test
Download
Documents
- icon:pdf.gif 1453-_HDG229_Hardware_Design_Guide_rev_B.pdf
- icon:pdf.gif 1543-HDG229_EVB_Quick_Start_Guide_pa1.pdf
- icon:pdf.gif 1543-SPB229_Driver_Install_User_Guide_Rev_C.pdf

Use Cases and tools

Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback